Solutions
Rapid Eurocode checks for everyday members
Verify steel sections to Eurocode 3, timber to Eurocode 5, and analyze portal frames — auditable reports that satisfy checking authorities.
Start here
Find your job on this list.
Steel Section Verification
Steel beams, columns and members verified against Eurocode 3 — automated section selection, utilization checks and calculation reports for approval submissions.
The tools
Products for Steel Verification & Eurocode Design Tools
Verification tools for single members, analysis programs for frames — pick the check the job needs.
Member verification
EUROCODE express
Rapid member checks across all eight structural Eurocodes — clause-referenced reports in minutes.
STEEL express
Steel beam, column and connection design to Eurocode 3 — DXF and PDF output included.
WOOD express
Timber member and connection design to Eurocode 5 — glulam and LVL included.
SteelSections EC3
Section properties, classification and resistances per EN 1993 — size members straight from the tables.
Frame analysis and design
FRAME 2D
Static and dynamic plane frame analysis — member checks to EC2, EC3 and EC5.
FRAME 2D express
Quick 2D frame analysis from 21 prototypes — Eurocode combinations and a Word-ready report.
Steel Portal Frame EC3
Single-bay portal frame analysis and design — rafters, columns, connections and footing in one pass.
Answered
Questions engineers ask us.
Steel beam and column design to Eurocode 3
STEEL express designs beams and columns straight to EN 1993-1-1. It classifies the cross-section, then checks resistance in axial, bending and shear. Flexural and lateral-torsional buckling checks run on the member. The report cites the exact Eurocode paragraph behind every check.
Bolted base-plate connection design (EN 1993)
STEEL express designs pinned and fixed column bases to EN 1993-1-8. Pinned bases carry vertical and horizontal forces; fixed bases add overturning moment. Anchor and washer-plate details come out with the design. CAD detail drawings export to DXF and PDF alongside the report.
Single-storey portal frame design with crane loads
The whole frame job runs in one tool. Linear-elastic FE analysis solves the single-bay frame with second-order effects included. Snow, wind and seismic loads generate to EN 1991 and EN 1998. Rafters, columns, connections and the pad footing design in the same pass.
Haunch and rafter design to Eurocode 3
Haunches at eaves and apex model as stiffened rafter elements. The analysis carries that stiffness, so the haunch effect shows in the forces. Rafter and haunch zones then verify to EN 1993-1-1. Checks cover cross-section resistance, flexural buckling and lateral-torsional buckling.
2D frame static and dynamic analysis
FRAME 2D solves plane frames for forces, displacements and diagrams. Dynamic analysis adds natural frequencies and mode shapes. A wizard sets up 21 ready frame types, or you enter nodes directly. The EC Design edition then checks members to EC2, EC3 and EC5.
Quick 2D frame analysis and member checks
Pick one of 21 frame prototypes and enter spans, sections and loads. Eurocode 1 combinations build automatically with editable partial factors. The solver returns force diagrams, then verifies members to EC2, EC3 and EC5. Checks run at member ends and mid-span, with a Word-ready report.
Rapid Eurocode member verification
Enter the section, material and loads; results come back in minutes. EUROCODE express spans all eight structural Eurocodes in one tool. The National Annex you pick sets the partial factors. Every check reports with its clause reference, ready for a checker.
Quick connection checks to EN standards
Bolted connections design to Eurocode 3 inside the program. Beam-to-beam, beam-to-column, splices and base plates are all covered. You build the joint component by component; no CAD import needed. The output is a clause-referenced calculation report for review.
Get started
Ready to cut routine code checks down to minutes?
Tell us the job. We will name the tool that does it and show you on your own model.
Book a demo