Next-generation FE tool for geotechnical practitioners

Applications


OPTUM G2 is the ideal solution for shallow foundation analysis and design. The unique Optum analysis type of Limit Analysis provides a means for determining bearing capacities in an efficient and convenient manner. Rigorous upper and lower bounds can be computed to bracket the true solution from above and below, thus providing an in-built means of numerical verification. Elastoplastic and consolidation analysis are available for determining settlements.

Project description


Deep excavations are often risky undertakings that require careful planning and, as part of that, detailed and accurate analysis. The reliability and efficiency of OPTUM G2 makes it the ideal tool the simulation of deep excavations. Accurate soil models and a wide array of tools and options for modelling support systems, from retaining walls to anchors and soil nails, are available.

Project description

Design of monopile foundations, i.e. most often large diameter steel piles resisting later loads of a large superstructure, can in many cases be carried out using the well-know p-y method. In many cases a full 3D FE soil-structure analysis is carried out e.g. to optimize the design and make significant reduction of steel usage or as a direct customer requirement.

When working with monopile foundations, we recommend using our 3D software OPTUM G3.


A road, railway line or canal is normally raised onto an embankment made of compacted soil (typically clay or rock-based) to avoid a change in level required by the terrain. OPTUM G2 provides an efficient and reliable means of simulating the construction of embankments. Settlements and pore pressures are calculated in a straightforward manner and the overall stability of the embankment can be gauged at any time.

Project description


In OPTUM G2, factors of safety are computed using Strength Reduction Finite Element Limit Analysis (SR-FELA).Besides short calculation times, SR-FELA also provides the possibility to calculate rigorous upper and lower bounds on the true factor of safety. In practice, this means that the true factor of safety can be determined with within a negligible tolerance in a matter of seconds.

Project description


In Retaining walls come in a wide variety of types including mass gravity walls, mechanically stabilized earth walls, gabion walls and sheet pile walls. All of these can be analysed efficiently and accurately using the OPTUM G2. The unique ability to compute rigorous upper and lower bounds on the true factor of safety add confidence in the results. When combined with mesh adaptivity, the result is a superior tool for design of retaining walls.

Project description


In Retaining walls come in a wide variety of types including mass gravity walls, mechanically stabilized earth walls, gabion walls and sheet pile walls. All of these can be analysed efficiently and accurately using the OPTUM G2. The unique ability to compute rigorous upper and lower bounds on the true factor of safety add confidence in the results. When combined with mesh adaptivity, the result is a superior tool for design of retaining walls.

Project description

Looking for Training?

We offer authorized training for OPTUM G2 , get certified locally and recognized globally today.

Optum G2

  • Foundations
  • Excavations
  • Monopile Foundations
  • Embankments
  • Slope Stability
  • Retaining Walls
  • Seepage and Groundwater Flow

 

Shallow foundation – Upper and lower bounds

Strength Reduction Analysis

Exporting and beautifying figures

Water Pressures

 

More OPTUM G2 videos on Youtube

Types Of License We Offer

Perpetual Licenses
Duration: Lifetime info
See Pricing
  • Customised training
  • Maintenance - Unlimited Support
  • Suitable for in-house design teams
  • Bulk Discounts
  • Long-term investment
  • Perfect for Institutions & Corporates
  • Available for all software we sell
Subscriptions Licenses
Duration: Customisable info
See Pricing
  • Customised training
  • Unlimited Support
  • Suitable for in-house design teams
  • No bulk discounts
  • Less expensive upfront
  • Perfect for MSME's
  • Available for all software we sell

Who Can Benefit

  • Geotechnical Engineers
  • Research Scholars
  • Academicians

OPTUM G2 – Geotechnical design made simple


Precise and realistic assessment of displacements is a fundamental part of many design tasks. With elastoplastic and consolidation analysis, a wide range of problems can be effectively designed. Staged analysis has never been easier with the user activating and deactivating regions in solid model – not on the meshed model.


Get access to the most advanced FE capabilities on the market – tailored and made accessible for engineering practitioners. With and unique built-in Limit Analysis options you can now calculate bearing capacities in a single step. Use this unique and amazingly fast analysis type in connection with traditional elasto-plastic analysis and move faster and safer ahead than ever before


One package for all design cases. Complete 2D plane strain and axisymmetric solution including elastoplastic, limit analysis, flow, consolidation and phi-c reduction gets you through most geotechnical problems – faster, easier and safer than ever before. Material models vary from simple to very advanced – all made accessible for geotechnical practitioners.


The user-friendely interface lets you setup models in an intuitive and logical workflow. Easily define soil layers with the drawing tool or input profiles with user defined variation as well as table look-up. Add structural elements like piles, plates, anchors and geogrids. For more complex geometry import your CAD file directly. Never again worry about mesh with the unique automatic adaptive mesh functionality

Talk With An Expert

Our OPTUM G2 experts are available round the clock to assist you, go ahead and connect now.

Customer's Feedback

It was really a fun experience using S-FOUNDATION. It is an easy-to-use software especially with an attractive interface (GUI). I have been teaching soil mechanics, geotechnical engineering & foundation engineering courses for the past 17 years in Malaysia with experience in PLAXIS.

Youventharan Duraisamy
University Malaysia Pahang

Similar Products

OPTUM G3

Shallow foundations, monopiles and much more. OPTUM G3 is a ground breaking Finite Element Analysis software package with all the Optum functionality...

Monthly EMI payment plan available

Frequently Ask Questions

All you have to do is create an Optum account. You can then download a 30 day trial of any Optum software.

If you have a valid academic e-mail address (student or employee), you can download a 3 month academic trial through your Optum account.

You can get an offer for any of our programs using our quote request  form or you can contact us.

We offer software packages locked to a single pc, a portable system or an office license for a local network.

In rare cases it might not be possible to access our license server for activation purposes.

You can easily activate the license manually instead. Here are the steps:

1. Open the application (G2 or G3) and open the license dialog by going to File/ Activate Product

2. Generate  activation request in the application by going to the “Machine” tab and tick the field “offline activation”

3. Enter the Activation key and press the button “Save Activation Request”. Save the file to any location on your drive.

4. Submit the request file to the manual activation site here: http://manualactivation.softwarepotential.com

5. Download the generated license file to any location on your drive.

6. In the application push the button “Browse response to activate”, select the downloaded file and finish the installation.

Log in to your Optum account to download the newest version of any software.

If you are interested in booking a personal webinar for yourself or a group of people, simply fill out the webinar request form, and we will contact you.

Select your currency